Fire security equipment and blueprint on a table. Good for security servise engeniering company site

josh December 2, 2019

The Importance of Having a Fire-Fighting System

What are the components of a fire-fighting system?

  1. Fire Alarms
  2. Fire Suppression
  3. Fire Doors
  4. Sprinklers
  5. Emergency Lighting
  6. Extinguishers

 

Safety against fire is vital for any country. Firefighting equipment should be a standard for any establishment. Every year, large numbers of people are at risk due to fires. Without a fire-fighting system, occupants of the building are at risk during emergencies. It’s an indispensable system, and each component plays an integral part in the safety of your establishment.

Fire protection has no shortcuts. It’s not an option, and it’s not a luxury. Some people believe they can skip out on fire protection because they think they won’t experience an emergency. Yet, many harmless objects could end up causing a fire. Here’s the importance of each component of a fire-fighting system.

 

Fire Alarms

Man is reaching his hand to push fire alarm hand station

Fire alarms are warning systems that alert your entire building to the possibility of a fire. Informing people early in an emergency can help occupants exit the premises safely to a designated area and wait for further instructions or assistance of authorities. Fire alarms are legal requirements for business and commercial establishments. It should have consistent upkeep, as well. At times, you may experience a power failure that requires the system to be reset. Electrical grounding can also shut the system down due to specific circuits. Water damage can also put your fire alarms in danger. Water can seep into the channels, causing the system to shut off.

It’s essential to service this system consistently. You may be unaware that some circuits are already faulty. This can affect the safety of your occupants. If you can’t alert people on time, they can be placed in stressful situations. These are your responsibilities. Make it a point to have a professional test your system to detect any hidden faults.

 

Fire Suppression

Fire suppression systems are the simplest way to tackle fires. The system triggers within seconds as soon as the trace tube is ruptured by heat. These are considered direct or indirect systems that require manual input or a centralized connection. These are less likely to develop problems since it requires very little electronic equipment to keep the system running. It only needs to be topped up or repaired.

If you’re unable to service your fire suppression system, there’s no point in using one. You won’t be able to identify if they’re functional. Managing your building’s systems require confidence that it’s fully functioning. Make sure to schedule maintenance for your fire suppression system.

 

Fire Doors

Fire exit ( Filtered image processed vintage effect. ) .

Fire doors are specialized doors that can contain fires in case one breaks out. This lets people make a safe escape and can confine the fire to one area as much as possible. These doors can get jammed if not correctly installed. Seals and hinges that don’t correctly fit can cause accidents and defeat the purpose of the fire door. It only takes a few minutes to have the door inspected. Don’t skip out on this as it can impact the safety of your building.

 

Sprinklers

Sprinklers will activate as soon as they detect the heat of the fire. This then releases water in the area. The water released will not only put out the fire but also dampen the surrounding area to prevent the fire from spreading further. The performance of your sprinklers is essential. If it’s left unused for years, rust can accumulate on components that can prevent it from working correctly. The water in the system can freeze, and the pipes can burst as well. You might find that it needs new parts for replacement. Keeping your sprinklers in check can assure you that it’ll work when you need it the most.

 

Emergency Lighting

Photo of empty passageway corridor in luxury house

Buildings have a fail-safe when a fire occurs. The power can cut off, and as soon as this happens, emergency lights are turned on to help light the way for any occupants left inside. The only way this equipment can become faulty is due to dead batteries or lamps. The last thing you want for your occupants during an emergency is to get left in the dark. Keeping your emergency lighting maintained adequately can save lives and avoid injuries.

 

Extinguishers

Fire extinguishers can help diffuse flames while it’s still controllable. Different types of extinguishers can be used against various types of fires. It can be flammable liquids, electrical fires, solid fires, and more. Fire extinguishers should be installed in critical areas of a room and the building to help prevent the fire from spreading.

When these are left alone for years before actually being used, it can become prone to rusting and weakening. It’s also important to teach your building occupants about fire safety and how to use extinguishers. Tampering with this can release the contents when not needed, and it could put someone in danger during an emergency.

 

Key Takeaway

Firefighting equipment is an absolute must for any building. A complete system can save lives when the time comes. Although there’s a low chance for a fire to occur, your firefighting system should be appropriately maintained to ensure that it’s ready for use in case of emergencies. Now that you know the importance of your firefighting system, remember to be mindful of their condition next time you have it checked.